MNET_USE

Syntax

MNET_USE id

Location

SMSQ/E, ATARI Emulators

Due to the fact that MIDINET Networks can be run on computers alongside SERNET Networks and even QNET Networks, it may be necessary to alter the identification letter used to access facilities on other computers in the Network. The default letter id is n (as with FSERVE), but this can be set to any other single letter by using this command. However, you should avoid letters which already appear as the first letter in another device driver (see DEVLIST).

Example

MNET_USE m
OPEN #3,m2_con_512x256a0x0

Open an input channel covering the screen on station number 2 in the MIDINET Network.

CROSS-REFERENCE

See MNET and MIDINET. Refer also toMNET_S%.