ACCEL_ON

Syntax ACCEL_ON
Location ST/QL

The ST/QL Emulator supports several of the accelerator boards which can be plugged into the Atari ST computer, thus allowing much greater operational speed. This command both enables the 16MHz mode on the Atari ST and tells the attached accelerator board to use its memory cache (if built in).

NOTE

This and the other ACCEL_… commands will be ignored unless you have previously used ACCEL_SET to define the type of accelerator board attached to the Atari ST.

CROSS-REFERENCE

ACCEL_OFF turns off the 16MHz mode (if possible) and also tells the accelerator board that it should no longer use its memory cache. Also see ACCEL_SET.