Toolkits ======== This manual covers a lot of toolkits, and there are probably many more to be added as time passes. This page of the manual lists the known toolkits in the manual at present (so will obviously need to be updated as times goes on) and shows simple links to the pages holding details of the commands provided by those toolkits. If more than one toolkit provides a command with the same name, the link will be to the *first* known entry in the manual. The page linked to should contain all versions of the particular command. Ähnlichkeiten ------------- The commands in this toolkit are: * :ref:`phonem` * :ref:`soundex` * :ref:`wld` ARRAY ----- The commands in this toolkit are: * :ref:`lar` * :ref:`sar` * :ref:`saro` * :ref:`searches` * :ref:`sort` ATARI Emulators --------------- The commands in this toolkit are: * :ref:`midinet` * :ref:`mnet` * :ref:`mnet-off` * :ref:`mnet-on` * :ref:`mnet-pct` * :ref:`mnet-s-pct` * :ref:`mnet-use` * :ref:`sernet` * :ref:`snet` * :ref:`snet-pct` * :ref:`snet-ropen` * :ref:`snet-s-pct` * :ref:`snet-use` ATARIDOS -------- The commands in this toolkit are: * :ref:`acopy` * :ref:`adelete` * :ref:`adir` * :ref:`aformat` * :ref:`aqconvert` * :ref:`astat` * :ref:`iqconvert` * :ref:`qaconvert` * :ref:`qcopy` * :ref:`qiconvert` ATARI\_REXT ----------- The commands in this toolkit are: * :ref:`a-sdate` * :ref:`a-speed` * :ref:`exchg` * :ref:`extras-w` * :ref:`kbd-reset` * :ref:`rom-ext` * :ref:`wset-def` * :ref:`wset` * :ref:`peek-dlr` * :ref:`poke-dlr` ATARI\_REXT - Pre v1.21 ~~~~~~~~~~~~~~~~~~~~~~~ This version of the toolkit provides the following, additional, commands: * :ref:`rom-load` ATARI\_REXT - v1.21 ~~~~~~~~~~~~~~~~~~~ This version of the toolkit provides the following, additional, commands: * :ref:`eprom-load` ATARI\_REXT - v1.24 to v2.15 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This version of the toolkit provides the following, additional, commands: * :ref:`snd-ext` ATARI\_REXT - v1.29 ~~~~~~~~~~~~~~~~~~~ This version of the toolkit provides the following, additional, commands: * :ref:`xlim` * :ref:`ylim` ATARI\_REXT - v2.10 ~~~~~~~~~~~~~~~~~~~ This version of the toolkit provides the following, additional, commands: * :ref:`a-rdate` ATARI\_REXT - v2.12 ~~~~~~~~~~~~~~~~~~~ This version of the toolkit provides the following, additional, commands: * :ref:`outln` ATARI\_REXT - v2.15 ~~~~~~~~~~~~~~~~~~~ This version of the toolkit provides the following, additional, commands: * :ref:`atari-ext` ATARI\_REXT - v2.17 ~~~~~~~~~~~~~~~~~~~ This version of the toolkit provides the following, additional, commands: * :ref:`peeks-l` ATARI\_REXT - v2.22 ~~~~~~~~~~~~~~~~~~~ This version of the toolkit provides the following, additional, commands: * :ref:`a-emulator` * :ref:`a-machine` * :ref:`a-processor` ATARI\_REXT - v2.25 ~~~~~~~~~~~~~~~~~~~ This version of the toolkit provides the following, additional, commands: * :ref:`scr-base` * :ref:`scr-llen` ATARI\_REXT - v2.27 ~~~~~~~~~~~~~~~~~~~ This version of the toolkit provides the following, additional, commands: * :ref:`a-oldscr` ATARI\_REXT for QVME - v2.31 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The commands in this toolkit are: * :ref:`free-fast` * :ref:`lresfast` * :ref:`resfast` Amiga QDOS - v3.20 ------------------ The commands in this toolkit are: * :ref:`button-pct` * :ref:`ptr-limits` * :ref:`ptr-max` * :ref:`ptr-off` * :ref:`ptr-on` * :ref:`ptr-pos` * :ref:`x-ptr-pct` * :ref:`y-ptr-pct` BGI --- The commands in this toolkit are: * :ref:`vg-hoch` * :ref:`vg-load` * :ref:`vg-para` * :ref:`vg-print` * :ref:`vg-reso` * :ref:`vg-wind` BIT --- The command in this toolkit is: * :ref:`bit-pct` BTool ----- The commands in this toolkist are: * :ref:`alchp` * :ref:`ask` * :ref:`basic` * :ref:`basic-f` * :ref:`basic-l` * :ref:`bclear` * :ref:`break` * :ref:`break-pct` * :ref:`btool-ext` * :ref:`btool-rmv` * :ref:`cbase` * :ref:`cchr-dlr` * :ref:`chanid` * :ref:`channels` * :ref:`clchp` * :ref:`close` * :ref:`close-pct` * :ref:`clrmdv` * :ref:`convcase-dlr` * :ref:`copy-b` * :ref:`copy-l` * :ref:`copy-w` * :ref:`ctab-dlr` * :ref:`cursor` * :ref:`cursor-pct` * :ref:`cvf` * :ref:`cvi-pct` * :ref:`cvl` * :ref:`cvs-dlr` * :ref:`default` * :ref:`default-dlr` * :ref:`default-pct` * :ref:`defined` * :ref:`eq-dlr` * :ref:`etab-dlr` * :ref:`extras` * :ref:`fdat` * :ref:`fgetb` * :ref:`fget-dlr` * :ref:`fgetf` * :ref:`fgeth-dlr` * :ref:`fgetl` * :ref:`fget-pct` * :ref:`file-open` * :ref:`find` * :ref:`flen` * :ref:`fname-dlr` * :ref:`fpos` * :ref:`fpos-a` * :ref:`fpos-r` * :ref:`fputb` * :ref:`fput-dlr` * :ref:`fputf` * :ref:`fputl` * :ref:`fput-pct` * :ref:`fread-dlr` * :ref:`free` * :ref:`freeze` * :ref:`freeze-pct` * :ref:`fseth-dlr` * :ref:`ftyp` * :ref:`fupdt` * :ref:`fwrite-dlr` * :ref:`fxtra` * :ref:`gt-dlr` * :ref:`input-dlr` * :ref:`io-pend-pct` * :ref:`jobcbs` * :ref:`kjob` * :ref:`kjobs` * :ref:`mkf-dlr` * :ref:`mki-dlr` * :ref:`mkl-dlr` * :ref:`mks-dlr` * :ref:`odd` * :ref:`off` * :ref:`on` * :ref:`peek-dlr` * :ref:`peek-f` * :ref:`poke-dlr` * :ref:`poke-f` * :ref:`qdos-dlr` * :ref:`qram-dlr` * :ref:`rechp` * :ref:`reljob` * :ref:`reply` * :ref:`report` * :ref:`reset` * :ref:`rjob` * :ref:`searches` * :ref:`sign` * :ref:`sint` * :ref:`spjob` * :ref:`susjob` * :ref:`tpfree` * :ref:`type` * :ref:`type-in` * :ref:`uint` * :ref:`wman-dlr` * :ref:`xchange` BeuleTools ---------- The commands in this toolkit are: * :ref:`alt` * :ref:`atari` * :ref:`bat` * :ref:`bat-dlr` * :ref:`bat-use` * :ref:`bclear` * :ref:`beule-ext` * :ref:`bld` * :ref:`bver-dlr` * :ref:`caps` * :ref:`cls-a` * :ref:`dbl` * :ref:`el` * :ref:`enl` * :ref:`esc` * :ref:`ff` * :ref:`key-add` * :ref:`key-rmv` * :ref:`kill` * :ref:`kill-a` * :ref:`killn` * :ref:`lint2` * :ref:`lmar` * :ref:`lpoll` * :ref:`lpr-use` * :ref:`lschd` * :ref:`md` * :ref:`nix` * :ref:`nocaps` * :ref:`norm` * :ref:`nrm` * :ref:`pagdis` * :ref:`paglen` * :ref:`paglin` * :ref:`pro` * :ref:`quatari` * :ref:`ramtop` * :ref:`reset` * :ref:`rmar` * :ref:`roms` * :ref:`screen` * :ref:`si` * :ref:`unl` * :ref:`wipe` COMPICT ------- The commands in this toolkit are: * :ref:`compress` * :ref:`expand` * :ref:`fastexpand` CONCAT ------ The command in this toolkit is: * :ref:`concat` CONVERT ------- The command in this toolkit is: * :ref:`convert` CRYPTAGE -------- The commands in this toolkit are: * :ref:`lock` * :ref:`unlock` DESPR ----- The command in this toolkit is: * :ref:`despr` DEV device ---------- The commands in this toolkit are: * :ref:`dev-list` * :ref:`dev-next` * :ref:`dev-use` * :ref:`dev-use-dlr` DIY Toolkit ----------- DIY Toolkit is supplied in a number of volumes, each dealing with a different area of the QL and QDOS. The volumes known to this manual are as follows: Volume A - Alias ~~~~~~~~~~~~~~~~ The commands in this volume are: * :ref:`-def-dlr` * :ref:`-def-pct` * :ref:`-name-dlr` * :ref:`alias` * :ref:`codevec` * :ref:`inverse` Volume B - Basic Tools ~~~~~~~~~~~~~~~~~~~~~~ The commands in this volume are: * :ref:`bpeek-l` * :ref:`bpoke-l` Volume C - Channels ~~~~~~~~~~~~~~~~~~~ The commands in this volume are: * :ref:`chan-l-pct` * :ref:`use` Volume E - Error Control ~~~~~~~~~~~~~~~~~~~~~~~~ The commands in this volume are: * :ref:`checkf` * :ref:`check-pct` * :ref:`edline-dlr` * :ref:`pick-dlr` * :ref:`purge` Volume F - File Tools ~~~~~~~~~~~~~~~~~~~~~ The commands in this volume are: * :ref:`gethead` * :ref:`sethead` Volume G - Graphics ~~~~~~~~~~~~~~~~~~~ The commands in this volume are: * :ref:`draw` * :ref:`pixel-pct` * :ref:`plot` Volume H - Heap and Horology ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The commands in this volume are: * :ref:`discard` * :ref:`linkup` * :ref:`reserve` * :ref:`t-count` * :ref:`t-off` * :ref:`t-on` * :ref:`t-restart` * :ref:`t-start` * :ref:`t-stop` Volume I - Serial Mouse ~~~~~~~~~~~~~~~~~~~~~~~ The commands in this volume are: * :ref:`synch-pct` * :ref:`x-ptr-pct` * :ref:`y-ptr-pct` * :ref:`button-pct` * :ref:`ptr-fn-pct` * :ref:`ptr-inc` * :ref:`ptr-key` * :ref:`ptr-limits` * :ref:`ptr-max` * :ref:`ptr-off` * :ref:`ptr-on` * :ref:`ptr-pos` Volume J - Jobs ~~~~~~~~~~~~~~~ The commands in this volume are: * :ref:`list-tasks` * :ref:`prioritise` * :ref:`release-task` * :ref:`remove-task` Volume M - MultiBASIC ~~~~~~~~~~~~~~~~~~~~~ The commands in this volume are: * :ref:`reload` * :ref:`remove` * :ref:`resave` * :ref:`scr-save` * :ref:`unload` Volume P - Pipes and Parameters ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The commands in this volume are: * :ref:`parhash` * :ref:`parname-dlr` * :ref:`parsepa` * :ref:`partype` * :ref:`qcount-pct` * :ref:`qlink` * :ref:`qsize-pct` * :ref:`qspace-pct` * :ref:`unset` Volume Q - Queues and QDOS ~~~~~~~~~~~~~~~~~~~~~~~~~~ The commands in this volume are: * :ref:`chbase` * :ref:`queue-pct` * :ref:`sysbase` Volume R - Replace ~~~~~~~~~~~~~~~~~~ The commands in this volume are: * :ref:`lookup-pct` * :ref:`lower-dlr` * :ref:`newchan-pct` * :ref:`replace` * :ref:`upper-dlr` Volume S - Qlipboard ~~~~~~~~~~~~~~~~~~~~ The commands in this volume are: * :ref:`clip-dlr` * :ref:`clip-pct` Volume T - Traps ~~~~~~~~~~~~~~~~ The commands in this volume are: * :ref:`addreg` * :ref:`btrap` * :ref:`datareg` * :ref:`mtrap` * :ref:`qtrap` Volume U - Environment Variables ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The commands in this volume are: * :ref:`alter` * :ref:`set` Volume V - More ~~~~~~~~~~~~~~~ The command in this volume is: * :ref:`more` Volume W - Windows ~~~~~~~~~~~~~~~~~~ The commands in this volume are: * :ref:`set-green` * :ref:`set-red` * :ref:`w-crunch` * :ref:`w-show` * :ref:`w-store` * :ref:`w-swap` * :ref:`w-swop` Volume X - MSearch and Vocab ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The commands in this volume are: * :ref:`search-mem` * :ref:`msearch` * :ref:`vocab` Volume Y - FlexyNet ~~~~~~~~~~~~~~~~~~~ The commands in this volume are: * :ref:`netbeep` * :ref:`netpoll` * :ref:`netrate` * :ref:`netread` * :ref:`netsend` * :ref:`netvar-pct` Volume Z - Array Search ~~~~~~~~~~~~~~~~~~~~~~~ The commands in this volume are: * :ref:`inarray-pct` * :ref:`maximum` * :ref:`maximum-pct` * :ref:`minimum` * :ref:`minimum-pct` Djtoolkit v1.16 --------------- The commands in this toolkit are: * :ref:`abs-position` * :ref:`bytes-free` * :ref:`check` * :ref:`dev-name` * :ref:`display-width` * :ref:`dj-open` * :ref:`dj-open-dir` * :ref:`dj-open-in` * :ref:`dj-open-new` * :ref:`dj-open-over` * :ref:`djtk-ver-dlr` * :ref:`fetch-bytes` * :ref:`file-backup` * :ref:`file-dataspace` * :ref:`file-length` * :ref:`file-position` * :ref:`file-type` * :ref:`file-update` * :ref:`fillmem-b` * :ref:`fillmem-l` * :ref:`fillmem-w` * :ref:`flush-channel` * :ref:`get-byte` * :ref:`get-float` * :ref:`get-long` * :ref:`get-string` * :ref:`get-word` * :ref:`kbytes-free` * :ref:`level2` * :ref:`max-con` * :ref:`max-devs` * :ref:`move-mem` * :ref:`move-position` * :ref:`peek-float` * :ref:`peek-string` * :ref:`poke-float` * :ref:`poke-string` * :ref:`put-byte` * :ref:`put-float` * :ref:`put-long` * :ref:`put-string` * :ref:`put-word` * :ref:`qptr` * :ref:`read-header` * :ref:`release-heap` * :ref:`reserve-heap` * :ref:`screen-base` * :ref:`screen-mode` * :ref:`search-c` * :ref:`search-i` * :ref:`set-header` * :ref:`set-xinc` * :ref:`set-yinc` * :ref:`system-variables` * :ref:`use-font` * :ref:`where-fonts` Disk Interfaces --------------- The command in this toolkit is: * :ref:`flp-step` ETAT ---- The command in this toolkit is: * :ref:`etat` Ecran Manager ------------- The commands in this toolkit are: * :ref:`sauto` * :ref:`scrof` * :ref:`scron` * :ref:`sload` * :ref:`smove` * :ref:`ssave` * :ref:`sshow` * :ref:`sstat` Environment Variables --------------------- The commands in this toolkit are: * :ref:`env-del` * :ref:`env-list` FACT ---- The command in this toolkit is: * :ref:`fact` FKEY ---- The command in this toolkit is: * :ref:`key` FN -- The commands in this toolkit are: * :ref:`fname-dlr` * :ref:`keyw` * :ref:`pinf-dlr` * :ref:`qdos-dlr` * :ref:`qflim` * :ref:`quatari` * :ref:`rmode` * :ref:`screen` * :ref:`scrinc` * :ref:`sys-base` * :ref:`thing` * :ref:`th-ver-dlr` * :ref:`win-base` * :ref:`winf-dlr` FN v1.02 Onwards ~~~~~~~~~~~~~~~~ This toolkit adds one extra command to then list in the FN toolkit above. This is: * :ref:`default-scr` FONTS ----- The command in this toolkit is: * :ref:`s-font` FRACT ----- The command in this toolkit is: * :ref:`fract` Fast PLOT/DRAW Toolkit ---------------------- The commands in this toolkit are: * :ref:`draw` * :ref:`plot` * :ref:`refresh` * :ref:`sclr` * :ref:`scrbase` GETSTUFF -------- The command in this toolkit is: * :ref:`get-stuff-dlr` Gold Card --------- The commands provided by the Gold Card ROM are: * :ref:`cache-off` * :ref:`cache-on` * :ref:`dev-list` * :ref:`dev-next` * :ref:`dev-use` * :ref:`dev-use-dlr` * :ref:`flp-density` * :ref:`flp-ext` * :ref:`flp-jiggle` * :ref:`flp-sec` * :ref:`flp-start` * :ref:`flp-step` * :ref:`flp-track` * :ref:`flp-use` * :ref:`par-use` * :ref:`prot-date` * :ref:`prt-abt` * :ref:`prt-use` * :ref:`ram-use` * :ref:`res-128` * :ref:`res-size` * :ref:`scr2dis` * :ref:`scr2en` * :ref:`sdp-dev` * :ref:`sdp-key` * :ref:`sdp-set` * :ref:`sdump` * :ref:`ser-pause` * :ref:`win2` Gold Card - v2.24 ~~~~~~~~~~~~~~~~~ The additional commands provided by this ROM are: * :ref:`slug` Gold Card - v2.67 ~~~~~~~~~~~~~~~~~ The additional commands provided by this ROM are: * :ref:`auto-dis` * :ref:`auto-tk2f1` * :ref:`auto-tk2f2` GPOINT ------ The commands in this toolkit are: * :ref:`gpoint` * :ref:`point` HCO --- The commands in this toolkit are: * :ref:`bicop` * :ref:`blook` * :ref:`bmove` * :ref:`col` * :ref:`dotlin` * :ref:`getxy` * :ref:`invxy` * :ref:`ldraw` * :ref:`paint` * :ref:`set` * :ref:`xdraw` HOTKEY II --------- The commands in this toolkit are: * :ref:`ert` * :ref:`exep` * :ref:`hot-chp1` * :ref:`hot-chp` * :ref:`hot-cmd` * :ref:`hot-do` * :ref:`hot-go` * :ref:`hot-key` * :ref:`hot-list` * :ref:`hot-load1` * :ref:`hot-load` * :ref:`hot-name-dlr` * :ref:`hot-off` * :ref:`hot-pick` * :ref:`hot-remv` * :ref:`hot-res1` * :ref:`hot-res` * :ref:`hot-set` * :ref:`hot-stop` * :ref:`hot-stuff` * :ref:`hot-thing` * :ref:`hot-type` * :ref:`hot-wake` Hard Disk Driver ---------------- The command provided in the hard disk driver is: * :ref:`win-use` History Device -------------- The commands in this toolkit are: * :ref:`his-set` * :ref:`his-size` * :ref:`his-unset` * :ref:`his-use-dlr` * :ref:`his-use` Hyper ----- The commands in this toolkit are: * :ref:`arcosh` * :ref:`arcoth` * :ref:`arsinh` * :ref:`artanh` * :ref:`cosh` * :ref:`coth` * :ref:`sinh` * :ref:`tanh` Hyperbola --------- The commands in this toolkit are: * :ref:`cosh` * :ref:`sinh` * :ref:`tanh` KEYMAN ------ The commands in this toolkit are: * :ref:`key` * :ref:`nokey` KILL ---- The command in this toolkit is: * :ref:`kill` LWCUPC ------ The commands in this toolkit are: * :ref:`lwc-dlr` * :ref:`upc-dlr` Level-2 Device Drivers ---------------------- The commands in the Level 2 and/or Level 3 drivers are: * :ref:`fbkdt` * :ref:`fmake-dir` * :ref:`fvers` * :ref:`make-dir` * :ref:`set-fbkdt` * :ref:`set-fupdt` * :ref:`set-fvers` MINMAX2 ------- The commands in this toolkit are: * :ref:`max` * :ref:`min` MULTI ----- The commands in this toolkit are: * :ref:`is-basic` * :ref:`p-env` Math Package ------------ The commands in this toolkit are: * :ref:`atn` * :ref:`atn2` * :ref:`binom` * :ref:`ceil` * :ref:`det` * :ref:`div` * :ref:`easter` * :ref:`eps` * :ref:`fact` * :ref:`gcd` * :ref:`gregor` * :ref:`inf` * :ref:`intmax` * :ref:`lcm` * :ref:`log2` * :ref:`matadd` * :ref:`matcount` * :ref:`matcount1` * :ref:`matdev` * :ref:`matequ` * :ref:`matidn` * :ref:`matinput` * :ref:`matinv` * :ref:`matmax` * :ref:`matmean` * :ref:`matmin` * :ref:`matmult` * :ref:`matplot` * :ref:`matplot-r` * :ref:`matprod` * :ref:`matread` * :ref:`matrnd` * :ref:`matseq` * :ref:`matsub` * :ref:`matsum` * :ref:`mattrn` * :ref:`max` * :ref:`min` * :ref:`mod` * :ref:`ndim` * :ref:`sgn` * :ref:`size` * :ref:`sqr` * :ref:`swap` Minerva ------- The commands in the Minerva ROM, over and above the standard QL ROM are: * :ref:`cmd-dlr` * :ref:`mb` * :ref:`window` Minerva - Trace Toolkit ----------------------- The commands in this toolkit are: * :ref:`sstep` * :ref:`troff` * :ref:`tron` Minerva Extensions Toolkit -------------------------- The command in this toolkit is: * :ref:`i2c-io` NDIM ---- The command in this toolkit is: * :ref:`ndim-pct` PAR/SER Interfaces ------------------ The command in the PAR/SER Interface ROM is: * :ref:`par-use` PEX --- The commands in this toolkit are: * :ref:`is-peon` * :ref:`is-ptrap` * :ref:`mode` | * :ref:`outl` * :ref:`peoff` * :ref:`peon` * :ref:`pex-dlr` * :ref:`pex-ini` * :ref:`pex-save` * :ref:`pex-xtd` * :ref:`pick-pct` * :ref:`pif-dlr` * :ref:`px1st` * :ref:`pxoff` * :ref:`pxon` * :ref:`ql-pex` PEX - v20 ~~~~~~~~~ This version of the PEX toolkit provides an additional command which is: * :ref:`wmov` PICEXT ------ The commands in this toolkit are: * :ref:`loadpic` * :ref:`savepic` PIE --- The commands in this toolkit are: * :ref:`pie-ex-off` * :ref:`pie-ex-on` * :ref:`pie-off` * :ref:`pie-on` PRIO ---- The command in this toolkit is: * :ref:`prio` PTRRTP ------ The commands in this toolkit are: * :ref:`ptr-x` * :ref:`ptr-y` * :ref:`rtp-r` * :ref:`rtp-t` Path device ----------- The commands provided by the Path device are: * :ref:`pth-add` * :ref:`pth-dlr` * :ref:`pth-list` * :ref:`pth-rmv` * :ref:`pth-use` * :ref:`pth-use-dlr` Pointer Interface - v1.23 Onwards --------------------------------- The commands in this toolkit are: * :ref:`ckeyoff` * :ref:`ckeyon` QL ROM ------ The commands in QL ROMs prior to version JM are: * :ref:`abs` * :ref:`acos` * :ref:`acot` * :ref:`adate` * :ref:`and` * :ref:`arc` * :ref:`arc-r` * :ref:`asin` * :ref:`at` * :ref:`atan` * :ref:`baud` * :ref:`beep` * :ref:`beeping` * :ref:`block` * :ref:`border` * :ref:`call` * :ref:`chr-dlr` * :ref:`circle` * :ref:`circle-r` * :ref:`clear` * :ref:`close` * :ref:`cls` * :ref:`code` * :ref:`continue` * :ref:`copy` * :ref:`copy-n` * :ref:`cos` * :ref:`cot` * :ref:`csize` * :ref:`cursor` * :ref:`data` * :ref:`date` * :ref:`date-dlr` * :ref:`day-dlr` * :ref:`define--function` * :ref:`define--procedure` * :ref:`define--xxx` * :ref:`deg` * :ref:`delete` * :ref:`dim` * :ref:`dimn` * :ref:`dir` * :ref:`div` * :ref:`dline` * :ref:`edit` * :ref:`ellipse` * :ref:`ellipse-r` * :ref:`else` * :ref:`end` * :ref:`end--define` * :ref:`end--for` * :ref:`end--if` * :ref:`end--repeat` * :ref:`end--select` * :ref:`eof` * :ref:`err-xx` * :ref:`exec` * :ref:`exec-w` * :ref:`exit` * :ref:`exp` * :ref:`fill` * :ref:`fill-dlr` * :ref:`flash` * :ref:`for` * :ref:`format` * :ref:`function` * :ref:`go--sub` * :ref:`go--to` * :ref:`if` * :ref:`ink` * :ref:`inkey-dlr` * :ref:`input` * :ref:`instr` * :ref:`int` * :ref:`keyrow` * :ref:`lbytes` * :ref:`len` * :ref:`let` * :ref:`line` * :ref:`line-r` * :ref:`list` * :ref:`ln` * :ref:`load` * :ref:`local` * :ref:`log10` * :ref:`lrun` * :ref:`merge` * :ref:`mistake` * :ref:`mod` * :ref:`mode` * :ref:`move` * :ref:`mrun` * :ref:`net` * :ref:`new` * :ref:`next` * :ref:`not` * :ref:`on...go--sub` * :ref:`open` * :ref:`open-in` * :ref:`open-new` * :ref:`or` * :ref:`over` * :ref:`pan` * :ref:`paper` * :ref:`pause` * :ref:`peek-l` * :ref:`pendown` * :ref:`penup` * :ref:`pi` * :ref:`point` * :ref:`point-r` * :ref:`poke-l` * :ref:`print` * :ref:`procedure` * :ref:`rad` * :ref:`randomise` * :ref:`read` * :ref:`recol` * :ref:`remainder` * :ref:`remark` * :ref:`renum` * :ref:`repeat` * :ref:`respr` * :ref:`restore` * :ref:`retry` * :ref:`return` * :ref:`rnd` * :ref:`run` * :ref:`save` * :ref:`sbytes` * :ref:`scale` * :ref:`scroll` * :ref:`sdate` * :ref:`select` * :ref:`select--on` * :ref:`sexec` * :ref:`sin` * :ref:`sqrt` * :ref:`step` * :ref:`stop` * :ref:`strip` * :ref:`sub` * :ref:`tan` * :ref:`then` * :ref:`to` * :ref:`turn` * :ref:`turnto` * :ref:`under` * :ref:`ver-dlr` * :ref:`width` * :ref:`window` * :ref:`xor` QL ROM JM Onwards ~~~~~~~~~~~~~~~~~ The JM ROM provided the following additional commands: * :ref:`end--when` * :ref:`erlin` * :ref:`ernum` * :ref:`error` * :ref:`report` * :ref:`tra` * :ref:`when--condition` * :ref:`when--error` QPC / QXL --------- The commands in the QXL ROM and QPC are: * :ref:`win-drive` * :ref:`win-drive-dlr` * :ref:`win-format` * :ref:`win-remv` * :ref:`win-start` * :ref:`win-stop` * :ref:`win-use` * :ref:`win-wp` QSOUND ------ The commands in this toolkit are: * :ref:`bell` * :ref:`channels` * :ref:`curdis` * :ref:`cursen` * :ref:`explode` * :ref:`extras` * :ref:`left` * :ref:`play` * :ref:`release` * :ref:`shoot` .. _qview-tinytoolkit: QView Tiny Toolkit ------------------ The Qview Tiny Toolkit, not to be confused with :ref:`tinytoolkit`, provides the following commands: * :ref:`ttall` * :ref:`tt-dlr` * :ref:`ttedelete` * :ref:`ttefp` * :ref:`tteopen` * :ref:`ttet3` * :ref:`ttex` * :ref:`ttex-w` * :ref:`ttfindm` * :ref:`ttinc` * :ref:`ttme-pct` * :ref:`ttmode-pct` * :ref:`ttpeek-dlr` * :ref:`ttpoke-dlr` * :ref:`ttpokem` * :ref:`ttrel` * :ref:`ttrename` * :ref:`ttsus` * :ref:`ttv` QVME - Level E-19 Drivers onwards --------------------------------- The commands in this toolkit are: * :ref:`disp-blank` * :ref:`disp-rate` * :ref:`disp-size` QXL --- The commands supplied in the QXL ROM are: * :ref:`disp-update` * :ref:`prt-abt` * :ref:`prt-use` * :ref:`win-drive` * :ref:`win-drive-dlr` * :ref:`win-format` * :ref:`win-remv` * :ref:`win-start` * :ref:`win-stop` * :ref:`win-use` * :ref:`win-wp` Qjump RAMPRT ------------ The command in this toolkit is: * :ref:`prt-use` RES --- The command in this toolkit is: * :ref:`reset` REV --- The command in this toolkit is: * :ref:`rev-dlr` SDUMP\_REXT ----------- SERMouse -------- The commands in this toolkit are: * :ref:`baudrate` * :ref:`bls` * :ref:`sermaws` * :ref:`sermcur` * :ref:`sermoff` * :ref:`sermon` * :ref:`sermptr` * :ref:`sermreset` * :ref:`sermspeed` * :ref:`sermwait` SMS --- The commands provided by SMS are: * :ref:`cache-off` * :ref:`cache-on` * :ref:`cmd-dlr` * :ref:`dev-list` * :ref:`dev-next` * :ref:`devtype` * :ref:`dev-use` * :ref:`dev-use-dlr` * :ref:`eofw` * :ref:`eprom-load` * :ref:`fbkdt` * :ref:`flp-density` * :ref:`flp-sec` * :ref:`flp-start` * :ref:`flp-step` * :ref:`flp-track` * :ref:`flp-use` * :ref:`fserve` * :ref:`io-priority` * :ref:`job-name` * :ref:`language` * :ref:`language-dlr` * :ref:`lang-use` * :ref:`peek-dlr` * :ref:`poke-dlr` * :ref:`prot-date` * :ref:`qload` * :ref:`qlrun` * :ref:`qmerge` * :ref:`qmrun` * :ref:`qsave` * :ref:`qsave-o` * :ref:`quit` * :ref:`ram-use` * :ref:`sbasic` * :ref:`slug` SMS - v2.31 ~~~~~~~~~~~ The additional command in this version of SMS is: * :ref:`kbd-table` SMSQ ---- The commands in this manual for SMSQ are: * :ref:`sb-thing` SMSQ - 3.26 ~~~~~~~~~~~ An additional command in SMSQ 3.26 onwards is: * :ref:`allocation` SMSQ/E ------ SMSQ/E provides the following commands: * :ref:`cd-alltime` * :ref:`cd-close` * :ref:`cd-eject` * :ref:`cd-firsttrack` * :ref:`cd-hour` * :ref:`cd-hsg2red` * :ref:`cd-init` * :ref:`cd-isclosed` * :ref:`cd-isinserted` * :ref:`cd-ispaused` * :ref:`cd-isplaying` * :ref:`cd-lasttrack` * :ref:`cd-length` * :ref:`cd-minute` * :ref:`cd-play` * :ref:`cd-red2hsg` * :ref:`cd-resume` * :ref:`cd-second` * :ref:`cd-stop` * :ref:`cd-track` * :ref:`cd-tracklength` * :ref:`cd-trackstart` * :ref:`cd-tracktime` * :ref:`chk-heap` * :ref:`day-pct` * :ref:`dev-usen` * :ref:`disp-inverse` * :ref:`disp-size` * :ref:`disp-type` * :ref:`disp-update` * :ref:`dos-drive` * :ref:`dos-drive-dlr` * :ref:`dos-use` * :ref:`fet` * :ref:`few` * :ref:`fex` * :ref:`fex-m` * :ref:`flp-density` * :ref:`flp-drive` * :ref:`flp-drive-dlr` * :ref:`flp-sec` * :ref:`flp-step` * :ref:`flp-use` * :ref:`hget` * :ref:`hot-getstuff-dlr` * :ref:`hput` * :ref:`jobid` * :ref:`lget` * :ref:`lput` * :ref:`machine` * :ref:`midinet` * :ref:`month-pct` * :ref:`mnet` * :ref:`mnet-off` * :ref:`mnet-on` * :ref:`mnet-pct` * :ref:`mnet-s-pct` * :ref:`mnet-use` * :ref:`mouse-speed` * :ref:`mouse-stuff` * :ref:`outln` * :ref:`par-abort` * :ref:`par-buff` * :ref:`par-clear` * :ref:`par-defaultprinter-dlr` * :ref:`par-getfilter` * :ref:`par-getprinter-dlr` * :ref:`par-printercount` * :ref:`par-printername-dlr` * :ref:`par-pulse` * :ref:`par-setfilter` * :ref:`par-setprinter` * :ref:`par-use` * :ref:`peeks-l` * :ref:`pokes-l` * :ref:`processor` * :ref:`prot-mem` * :ref:`prt-abort` * :ref:`prt-buff` * :ref:`prt-clear` * :ref:`prt-use` * :ref:`prt-use-dlr` * :ref:`qpc-cmdline-dlr` * :ref:`qpc-exec` * :ref:`qpc-exit` * :ref:`qpc-hostos` * :ref:`qpc-maximize` * :ref:`qpc-minimize` * :ref:`qpc-mspeed` * :ref:`qpc-netname-dlr` * :ref:`qpc-qlscremu` * :ref:`qpc-restore` * :ref:`qpc-syncscrap` * :ref:`qpc-ver-dlr` * :ref:`qpc-windowsize` * :ref:`qpc-windowtitle` * :ref:`reset` * :ref:`sb-thing` * :ref:`scr-base` * :ref:`scr-llen` * :ref:`scr-xlim` * :ref:`scr-ylim` * :ref:`ser-abort` * :ref:`ser-buff` * :ref:`ser-cdeof` * :ref:`ser-clear` * :ref:`ser-flow` * :ref:`ser-getport-dlr` * :ref:`sernet` * :ref:`ser-pause` * :ref:`ser-room` * :ref:`ser-setport` * :ref:`ser-use` * :ref:`snet` * :ref:`snet-pct` * :ref:`snet-ropen` * :ref:`snet-s-pct` * :ref:`snet-use` * :ref:`th-fix` * :ref:`weekday-pct` * :ref:`wget` * :ref:`when--condition` * :ref:`win-drive` * :ref:`win-drive-dlr` * :ref:`win-remv` * :ref:`win-slug` * :ref:`win-start` * :ref:`win-stop` * :ref:`win-use` * :ref:`win-wp` * :ref:`wput` * :ref:`year-pct` SMSQ/E - v2.50 Onwards ~~~~~~~~~~~~~~~~~~~~~~ This version provided the following additional command(s): * :ref:`hot-thing1` SMSQ/E - v2.55 Onwards ~~~~~~~~~~~~~~~~~~~~~~ This version provided the following additional command(s): * :ref:`uput` SMSQ/E - v2.58 Onwards ~~~~~~~~~~~~~~~~~~~~~~ This version provided the following additional command(s): * :ref:`instr-case` SMSQ/E - v2.71 Onwards ~~~~~~~~~~~~~~~~~~~~~~ This version provided the following additional command(s): * :ref:`send-event` * :ref:`wait-event` SMSQ/E - v2.73 Onwards ~~~~~~~~~~~~~~~~~~~~~~ This version provided the following additional command(s): * :ref:`dmedium-density` * :ref:`dmedium-drive-dlr` * :ref:`dmedium-format` * :ref:`dmedium-free` * :ref:`dmedium-name-dlr` * :ref:`dmedium-rdonly` * :ref:`dmedium-remove` * :ref:`dmedium-total` * :ref:`dmedium-type` SMSQ/E - v2.98 Onwards ~~~~~~~~~~~~~~~~~~~~~~ This version provided the following additional command(s): * :ref:`bgcolour-24` * :ref:`bgcolour-ql` * :ref:`bgimage` * :ref:`colour-24` * :ref:`colour-native` * :ref:`colour-pal` * :ref:`colour-ql` * :ref:`palette-8` * :ref:`palette-ql` SMSQ/E - v3.00 Onwards ~~~~~~~~~~~~~~~~~~~~~~ This version provided the following additional command(s): * :ref:`wm-block` * :ref:`wm-border` * :ref:`wm-ink` * :ref:`wm-paper` * :ref:`wm-strip` SMSQ/E - v3.01 Onwards ~~~~~~~~~~~~~~~~~~~~~~ This version provided the following additional command(s): * :ref:`wm-movemode` SMSQ/E - v3.12 Onwards ~~~~~~~~~~~~~~~~~~~~~~ This version provided the following additional command(s): * :ref:`pe-bgoff` * :ref:`pe-bgon` SMSQ/E - v2.73 for Atari ~~~~~~~~~~~~~~~~~~~~~~~~ Additional command(s) in this version of SMSQ/E are: * :ref:`win-format` SMSQ/E for Atari Additional command(s) in this version of SMSQ/E are: * :ref:`par-pulse` * :ref:`win-drive` * :ref:`win-drive-dlr` * :ref:`win-remv` * :ref:`win-slug` * :ref:`win-start` * :ref:`win-stop` * :ref:`win-use` * :ref:`win-wp` SMSQ/E for Atari ST & TT Additional command(s) in this version of SMSQ/E are: * :ref:`disp-inverse` SMSQ/E for Q68 ~~~~~~~~~~~~~~ The commands in this toolkit are: * :ref:`alfm` * :ref:`card-create` * :ref:`card-dir-dlr` * :ref:`card-init` * :ref:`card-renf` * :ref:`disp-mode` * :ref:`fat-drive` * :ref:`fat-drive-dlr` * :ref:`fat-use` * :ref:`fat-wp` * :ref:`free-fmem` * :ref:`killsound` * :ref:`qub-drive` * :ref:`qub-drive-dlr` * :ref:`qub-use` * :ref:`qub-wp` * :ref:`slug` * :ref:`soundfile` * :ref:`soundfile2` * :ref:`soundfile3` * :ref:`win-check` * :ref:`win-drive` * :ref:`win-drive-dlr` * :ref:`win-format` * :ref:`win-safe` * :ref:`win-use` * :ref:`win-wp` SMSQ/E for QPC ~~~~~~~~~~~~~~ The commands in this toolkit are: * :ref:`cd-alltime` * :ref:`cd-close` * :ref:`cd-eject` * :ref:`cd-firsttrack` * :ref:`cd-hour` * :ref:`cd-hsg2red` * :ref:`cd-init` * :ref:`cd-isclosed` * :ref:`cd-isinserted` * :ref:`cd-ispaused` * :ref:`cd-isplaying` * :ref:`cd-lasttrack` * :ref:`cd-length` * :ref:`cd-minute` * :ref:`cd-play` * :ref:`cd-red2hsg` * :ref:`cd-resume` * :ref:`cd-second` * :ref:`cd-stop` * :ref:`cd-track` * :ref:`cd-tracklength` * :ref:`cd-trackstart` * :ref:`cd-tracktime` * :ref:`dos-drive` * :ref:`dos-drive-dlr` * :ref:`dos-use` * :ref:`flp-density` * :ref:`flp-drive` * :ref:`flp-drive-dlr` * :ref:`flp-sec` * :ref:`flp-step` * :ref:`flp-use` * :ref:`machine` * :ref:`mouse-speed` * :ref:`mouse-stuff` * :ref:`par-defaultprinter-dlr` * :ref:`par-getfilter` * :ref:`par-getprinter-dlr` * :ref:`par-printercount` * :ref:`par-printername-dlr` * :ref:`par-setfilter` * :ref:`par-setprinter` * :ref:`qpc-cmdline-dlr` * :ref:`qpc-exec` * :ref:`qpc-exit` * :ref:`qpc-hostos` * :ref:`qpc-maximize` * :ref:`qpc-minimize` * :ref:`qpc-mspeed` * :ref:`qpc-netname-dlr` * :ref:`qpc-qlscremu` * :ref:`qpc-restore` * :ref:`qpc-syncscrap` * :ref:`qpc-ver-dlr` * :ref:`qpc-windowsize` * :ref:`qpc-windowtitle` * :ref:`ser-getport-dlr` * :ref:`ser-setport` ST/QL ----- The commands in this toolkit are: * :ref:`accel-off` * :ref:`accel-on` * :ref:`accel-set` * :ref:`accel-state` * :ref:`append` * :ref:`bell` * :ref:`dev-list` * :ref:`dev-next` * :ref:`dev-use` * :ref:`dev-use-dlr` * :ref:`explode` * :ref:`flp-track` * :ref:`flp-use` * :ref:`ger-msg` * :ref:`ger-tra` * :ref:`nor-msg` * :ref:`nor-tra` * :ref:`par-abort` * :ref:`par-buff` * :ref:`par-clear` * :ref:`par-pulse` * :ref:`par-use` * :ref:`play` * :ref:`prt-abort` * :ref:`prt-buff` * :ref:`prt-clear` * :ref:`prt-use` * :ref:`prt-use-dlr` * :ref:`ram-use` * :ref:`release` * :ref:`sdp-dev` * :ref:`sdp-key` * :ref:`sdp-set` * :ref:`sdump` * :ref:`ser-abort` * :ref:`ser-buff` * :ref:`ser-clear` * :ref:`ser-flow` * :ref:`ser-room` * :ref:`ser-use` * :ref:`shoot` * :ref:`win-drive` * :ref:`win-slug` * :ref:`win-start` * :ref:`win-stop` * :ref:`win-use` ST/QL - Pre v2.24 ~~~~~~~~~~~~~~~~~ This toolkit provides the following, additional, command: * :ref:`a-blank` ST/QL - Level B-11 Onwards ~~~~~~~~~~~~~~~~~~~~~~~~~~ This toolkit provides the following, additional, command: * :ref:`th-fix` ST/QL - Level C-17 Onwards ~~~~~~~~~~~~~~~~~~~~~~~~~~ This toolkit provides the following, additional, command: * :ref:`kbd-table` ST/QL - Level C-19 Onwards ~~~~~~~~~~~~~~~~~~~~~~~~~~ This toolkit provides the following, additional, command: * :ref:`win2` ST/QL - Level C-20 Onwards ~~~~~~~~~~~~~~~~~~~~~~~~~~ This toolkit provides the following, additional, command: * :ref:`win-remv` ST/QL - Level D00 Onwards ~~~~~~~~~~~~~~~~~~~~~~~~~ This toolkit provides the following, additional, command: * :ref:`ser-cdeof` ST/QL - level D.02 Onwards ~~~~~~~~~~~~~~~~~~~~~~~~~~ This toolkit provides the following, additional, command: * :ref:`flp-start` STAMP ----- The command in this toolkit is: * :ref:`stamp` SWAP ---- The commands in this toolkit are: * :ref:`swap` * :ref:`w-swap` SYSBASE ------- The command in this toolkit is: * :ref:`sys-base` Shape Toolkit ------------- The commands in this toolkit are: * :ref:`aline` * :ref:`apoint` * :ref:`demo` Super Gold Card --------------- The command in the SGC ROM is: * :ref:`slug` SuperQBoard ----------- The command in this toolkit is: * :ref:`par-use` SuperWindow Toolkit ------------------- The commands in this toolkit are: * :ref:`scr-refresh` * :ref:`scr-size` * :ref:`scr-store` THOR ---- Commands provided on THOR machines are: * :ref:`close` * :ref:`flp-sec` * :ref:`flp-start` * :ref:`flp-track` * :ref:`flp-use` * :ref:`language-dlr` * :ref:`set-clock` * :ref:`set-language` * :ref:`top-window` * :ref:`wcopy` * :ref:`wcopy-f` * :ref:`wcopy-o` * :ref:`wdel` * :ref:`wdel-f` * :ref:`wdir` * :ref:`wstat` THOR 8 ~~~~~~ The THOR 8 added an additional command: * :ref:`wmon` THOR 8 - v4.20 Onwards ~~~~~~~~~~~~~~~~~~~~~~ The additional command(s) in the version are: * :ref:`wtv` THOR XVI ~~~~~~~~ Commands provided on THOR XVI machines are: * :ref:`alchp` * :ref:`bget` * :ref:`bin` * :ref:`bin-dlr` * :ref:`bput` * :ref:`cdec-dlr` * :ref:`char-inc` * :ref:`char-use` * :ref:`clchp` * :ref:`clock` * :ref:`copy` * :ref:`copy-n` * :ref:`copy-o` * :ref:`curdis` * :ref:`cursen` * :ref:`data-use` * :ref:`ew` * :ref:`ex` * :ref:`extras` * :ref:`fdat` * :ref:`fdec-dlr` * :ref:`flen` * :ref:`fop-dir` * :ref:`fopen` * :ref:`fop-in` * :ref:`fop-new` * :ref:`fop-over` * :ref:`fpos` * :ref:`free-mem` * :ref:`fserve` * :ref:`ftyp` * :ref:`get` * :ref:`hex` * :ref:`hex-dlr` * :ref:`idec-dlr` * :ref:`io-trap` * :ref:`jobs` * :ref:`lrespr` * :ref:`make-dir` * :ref:`net-id` * :ref:`nfs-use` * :ref:`no-clock` * :ref:`open-dir` * :ref:`open-over` * :ref:`partyp` * :ref:`paruse` * :ref:`prog-use` * :ref:`put` * :ref:`rechp` * :ref:`rename` * :ref:`report` * :ref:`rjob` * :ref:`save-o` * :ref:`sbytes-o` * :ref:`sexec-o` * :ref:`spjob` * :ref:`spl` * :ref:`splf` * :ref:`spl-use` * :ref:`stat` * :ref:`sys-vars` * :ref:`truncate` * :ref:`view` * :ref:`when--condition` * :ref:`when--error` * :ref:`win2` * :ref:`window` * :ref:`win-use` * :ref:`wmon` * :ref:`wtv` TRIM ---- The command in this toolkit is: * :ref:`trim-dlr` TRIPRODRO --------- The commands in this toolkit are: * :ref:`dround` * :ref:`pround` * :ref:`trint` TRUFA ----- The commands in this toolkit are: * :ref:`false-pct` * :ref:`true-pct` .. _tinytoolkit: TinyToolkit ----------- TinyToolkit, not to be confused with :ref:`qview-tinytoolkit`, provides the following commands: * :ref:`basic-l` * :ref:`basicp` * :ref:`bclear` * :ref:`break-off` * :ref:`cbase` * :ref:`change` * :ref:`chanid` * :ref:`channels` * :ref:`clear-hot` * :ref:`close-pct` * :ref:`clrmdv` * :ref:`cur` * :ref:`devlist` * :ref:`elis` * :ref:`file-dat` * :ref:`file-len` * :ref:`file-pos` * :ref:`file-ptra` * :ref:`file-ptrr` * :ref:`flis` * :ref:`force-type` * :ref:`fread` * :ref:`fwrite` * :ref:`get-byte-dlr` * :ref:`grab` * :ref:`headr` * :ref:`heads` * :ref:`hot` * :ref:`jbase` * :ref:`kjob` * :ref:`kjobs` * :ref:`new-name` * :ref:`odd` * :ref:`peek-dlr` * :ref:`pend` * :ref:`poke-dlr` * :ref:`qdos-dlr` * :ref:`qram-dlr` * :ref:`rand` * :ref:`release` * :ref:`rel-job` * :ref:`report` * :ref:`reset` * :ref:`rom` * :ref:`searches` * :ref:`sjob` * :ref:`s-load` * :ref:`s-save` * :ref:`s-show` * :ref:`sxtras` * :ref:`tconnect` * :ref:`tiny-ext` * :ref:`tiny-rmv` * :ref:`txtras` * :ref:`type` * :ref:`upper-dlr` * :ref:`wbase` * :ref:`wman-dlr` * :ref:`zap` TinyToolkit - Pre v1.10 ~~~~~~~~~~~~~~~~~~~~~~~ The commands in versions of TinyToolkit prior to 1.10 is: * :ref:`spjob` TinyToolkit - v1.10 Onwards ~~~~~~~~~~~~~~~~~~~~~~~~~~~ The additional command provided in these versions is: * :ref:`sp-job` Toolfin ------- The commands in this toolkit are: * :ref:`mt` * :ref:`rae` * :ref:`rafe` * :ref:`tca` * :ref:`tee` * :ref:`tnc` * :ref:`var` * :ref:`var` * :ref:`vfr` Toolkit II ---------- The commands in this toolkit are: * :ref:`ajob` * :ref:`alarm` * :ref:`alchp` * :ref:`altkey` * :ref:`bget` * :ref:`bin` * :ref:`bin-dlr` * :ref:`bput` * :ref:`cdec-dlr` * :ref:`char-inc` * :ref:`char-use` * :ref:`clchp` * :ref:`clock` * :ref:`close` * :ref:`continue` * :ref:`copy` * :ref:`copy-h` * :ref:`copy-n` * :ref:`copy-o` * :ref:`curdis` * :ref:`cursen` * :ref:`datad-dlr` * :ref:`data-use` * :ref:`ddown` * :ref:`del-defb` * :ref:`delete` * :ref:`destd-dlr` * :ref:`dest-use` * :ref:`dir` * :ref:`dlist` * :ref:`dnext` * :ref:`do` * :ref:`dup` * :ref:`ed` * :ref:`et` * :ref:`ew` * :ref:`ex` * :ref:`exec` * :ref:`exec-w` * :ref:`extras` * :ref:`fdat` * :ref:`fdec-dlr` * :ref:`fexp-dlr` * :ref:`flen` * :ref:`flush` * :ref:`fname-dlr` * :ref:`fop-dir` * :ref:`fopen` * :ref:`fop-in` * :ref:`fop-new` * :ref:`fop-over` * :ref:`fpos` * :ref:`free-mem` * :ref:`ftest` * :ref:`ftyp` * :ref:`fupdt` * :ref:`fxtra` * :ref:`get` * :ref:`hex` * :ref:`hex-dlr` * :ref:`idec-dlr` * :ref:`job-dlr` * :ref:`jobs` * :ref:`lbytes` * :ref:`load` * :ref:`lrespr` * :ref:`lrun` * :ref:`merge` * :ref:`mrun` * :ref:`new` * :ref:`nfs-use` * :ref:`nxjob` * :ref:`ojob` * :ref:`open` * :ref:`open-dir` * :ref:`open-in` * :ref:`open-new` * :ref:`open-over` * :ref:`parnam-dlr` * :ref:`parstr-dlr` * :ref:`partyp` * :ref:`paruse` * :ref:`pjob` * :ref:`print-using` * :ref:`progd-dlr` * :ref:`prog-use` * :ref:`put` * :ref:`rechp` * :ref:`rename` * :ref:`report` * :ref:`retry` * :ref:`rjob` * :ref:`save` * :ref:`save-o` * :ref:`sbytes` * :ref:`sbytes-o` * :ref:`sexec` * :ref:`sexec-o` * :ref:`spjob` * :ref:`spl` * :ref:`splf` * :ref:`spl-use` * :ref:`stat` * :ref:`stop` * :ref:`tk2-ext` * :ref:`truncate` * :ref:`view` * :ref:`wcopy` * :ref:`wdel` * :ref:`wdir` * :ref:`wmon` * :ref:`wren` * :ref:`wstat` * :ref:`wtv` Toolkit II - Hardware Version Only or SMS ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The hardware (ROM, Disc INterface etc) and SMS versions of Toolkit II provide the following command: * :ref:`fserve` Trump Card ---------- The commands supplied in the Trump Card ROM are: * :ref:`flp-sec` * :ref:`flp-start` * :ref:`flp-track` * :ref:`flp-use` * :ref:`prt-abt` * :ref:`prt-use` * :ref:`ram-use` * :ref:`res-128` * :ref:`sdp-dev` * :ref:`sdp-key` * :ref:`sdp-set` * :ref:`sdump` Turbo Toolkit ------------- The commands in this toolkit are: * :ref:`allocation` * :ref:`basic-f` * :ref:`basic-index-pct` * :ref:`basic-l` * :ref:`basic-name-dlr` * :ref:`basic-pointer` * :ref:`basic-type-pct` * :ref:`catnap` * :ref:`channel-id` * :ref:`charge` * :ref:`command-line` * :ref:`compiled` * :ref:`connect` * :ref:`cursor-off` * :ref:`cursor-on` * :ref:`data-area` * :ref:`dataspace` * :ref:`deallocate` * :ref:`default-device` * :ref:`device-space` * :ref:`device-status` * :ref:`edit-dlr` * :ref:`editf` * :ref:`edit-pct` * :ref:`end-cmd` * :ref:`end-when` * :ref:`erlin-pct` * :ref:`ernum-pct` * :ref:`tk-ver-dlr` Turbo Toolkit - v3.00 ~~~~~~~~~~~~~~~~~~~~~ This version of the toolkit added the following commands: * :ref:`turbo-diags` * :ref:`turbo-f` * :ref:`turbo-locstr` * :ref:`turbo-model` * :ref:`turbo-objdat` * :ref:`turbo-objfil` * :ref:`turbo-optim` * :ref:`turbo-p` * :ref:`turbo-repfil` * :ref:`turbo-struct` * :ref:`turbo-taskn` * :ref:`turbo-window` Turbo Toolkit - v3.20 ~~~~~~~~~~~~~~~~~~~~~ This version of the toolkit added the following commands: * :ref:`debug` * :ref:`debug-level` UNJOB ----- The command in this toolkit is: * :ref:`unjob` WIPE ---- The command in this toolkit is: * :ref:`wipe` WM -- The command in this toolkit is: * :ref:`wm` XKBD ---- The command in this toolkit is: * :ref:`kbd-use`